Pro Island Hood Specifications
7
wolfappliance.com/specs
Installation Specifications
The illustration below provides dimensions critical for
proper installation of the pro island hood. Dimensions A
and B in the illustration will vary with the width of the
hood. Refer to the chart below.
Pro Island Hoods
WIDTH OF HOOD
A
B
36"
(914)
18"
(457)
9"
(228)
42"
(1067)
24"
(610)
12"
(304)
54"
(1371)
*
36"
(914)
18"
(457)
66"
(1676)
*
48"
(1219)
24"
(610)
A
WIDTH OF
TOP PLATE
6
1/2
"
(165)
10"
(254)
B
TO CENTER
OF TRANSITION
7"
(178)
13"
(330)
Pro island hoods.
Electrical Requirements
Wolf pro ventilation hoods require a separate, grounded
120 V AC, 60 Hz power supply. The service should have its
own 15 amp circuit breaker. Locate the electrical supply in
the ceiling through the top of the island hood. Refer to the
installation specifications illustration on the previous page.
IMPORTANT NOTE:
You must follow all National Electrical
Code regulations. In addition, be aware of local codes and
ordinances when installing your service.
Risk of electrical shock. This ventilation hood must be
properly grounded. Electrical service for the hood must
be installed by a qualified electrician in accordance
with all applicable national and local electrical codes.