4
B E F O R E
Y O U S T A R T
Proper installation is your responsibility.
Installations must be performed by a
qualified or licensed contractor, plumber or
gas fitter, qualified or licensed by the state,
province or region where this appliance is
being installed. You must also assure that
electrical installation is adequate and
conforms with all local codes and ordi-
nances.
Wolf gas ranges are manufactured for use
with natural gas or LP gas. Please check
the product rating plate for type of gas
needed.
Proper gas connection must be available;
refer to Gas Supply Requirements on pages
12–13. Electrical ground is required; see
Electrical Requirements on page 14.
Check the location where the range will be
installed. The location should be away from
strong draft areas, such as windows, doors
and strong heating vents or fans. Do not
obstruct the flow of air. The area in which
you are installing this appliance must have
an adequate supply of fresh air to ensure
proper combustion and ventilation.
Make sure you have everything necessary
for correct installation. It is the responsibil-
ity of the installer to comply with the speci-
fied installation clearances. Refer to the
Installation Specifications illustrations for
your model on pages 7–10.
C O M M O N W E A L T H O F M A S S A C H U S E T T S
Installations and repairs must be performed
by a qualified or licensed contractor,
plumber or gasfitter qualified or licensed by
the state, province, or region where this
appliance is being installed.
Only use gas shut-off valves approved for
use within the state, province, or region
where this appliance is being installed.
A flexible gas connector, when used, must
not exceed 3' (.9 m).
W O L F
G A S R A N G E S
