- 7 -
When operated as pulsing thermostat:
Text
Basic setting Min. value Max. value
ProP
ortional band
3.0
K
1.0K 10.0K
Width of
PuLS
e
5
min
1min 15min
6. Setting of functions
By pressing „PROG“ for 6 seconds you
reach a menu which ou can set various
basic functions in. The function is indicated
in the left part of the display
MO DI MI DO FR SA SO
and the pertening value respectively the position is indicated in
the right part of the display. The value can be changed with +
and - keys. You reach the next choice with „SET“. If you confirm
the last function with „SET“ the thermostat goes back to the
operating mode out of which the menu „Setting of functions“ has
been polled. The individual functions have the following meaning:
Text
Basic
setting
Limits/
Alternative
SEnS
(Sensor alignment)
0.0
K
±
3.0
K
Please do not align sensors immediately after
installation of the thermostat. as you need
temperature values which do not change too
much any longer. Moreover a sensor
alignment should be done at normal ambient
temperatures (approx. 20 °C).
In order to proceed with a correct sensor
alignment, the actual temperature indicated
by the thermostat as well as the temperature
at the sensor should be known (temperature
at the sensor must be measured by an
appropriate appliance). The difference
between these two values can be set within
limits of
±
3.0K in menu point SEnS.
Example:
The thermostat indicates 20.7°C.
The thermometer indicates 19.9 °C
at the sensor.
The unit reading must be adjusted
by
–0.8.
H C
(Heating / Cooling)
HE
(heating)
Co
(cooling)
In the mode „heating“ the controlled relay is
indicated by an arrow upwards in the left
part of the display. In mode „cooling“ the
relay is indicated by an arrow downwards.
2PPu
(On/Off /Pulse)
2-P
(On/OFF)
PuL
(Pulsing)
Changing the control function from On/Off
to pulsing always leads to the appropriate
parameters computing with the basic
settings. These basic settings are indicated
bold print in menu point „setting of
parameter“. If necessary these values have
to be changed as described before.
I E
(Internal- / Remote sensor)
I
(intern)
E
(extern)
If the remote sensor has been selected but
there is no temperature sensor connectedI
the display indicates 65.0°C. The
thermostat does not control the output.
Loc
(Keyboard lock)
oFF
(inaktiv)
on
(aktiv)
The keyboard lock also prevents from
changing comfort value respectively
temperature setback value with the knobs.
However, if the keyboard lock is deleted a
value for comfort temperature resp.
temperature setback, which has been
changed in the meantime, is taken over.
You deactivate the keyboard lock if you
press „PROG“ for 6 seconds.. An active
keyboard lock is indicated by a key symbol.
2PPu
(On/Off /Pulse)
2-P
(On/OFF)
PuL
(Pulsing)
Changing the control function from On/Off
to pulsing always leads to the appropriate
parameters computing with the basic
settings. These basic settings are indicated
bold print in menu point „setting of
parameter“. If necessary these values have
to be changed as described before.
I E
(Internal- / Remote sensor)
I
(intern)
E
(extern)
If the remote sensor has been selected but
there is no temperature sensor connectedI
the display indicates 65.0
C. The
thermostat does not control the output.
Loc
(Keyboard lock)
oFF
(inaktiv)
on
(aktiv)
The keyboard lock also prevents from
changing comfort value respectively
temperature setback value with the knobs.
However, if the keyboard lock is deleted a
value for comfort temperature resp.
temperature setback, which has been
changed in the meantime, is taken over.
You deactivate the keyboard lock if you
press „PROG“ for 6 seconds.. An active
keyboard lock is indicated by a key symbol.
