www.wolfeetechnologies.com
Sleeper Mode and Wakeup
User can use On/Off Switch on Wolfee Pr to turn on or off the device. When it is on and
connected to a host, LED indicator emits solid light, the presenter will be active for as long as the host
is active and connected with the presenter. When the switch is on but not connected to a host, the
presenter is in Discovery Mode, LED indicator blinks. In this case, the presenter will shut off power,
turn off LED indicator and enter Sleeper Mode after 3 minutes.
You can wake up a presenter from Sleeper Mode in two ways. One click on Top Button, or one click
on Mouse Left Button. The difference is, when use Mouse Left Button to wakeup the device, all stored
information on past bonded hosts are cleared.
Another way to bring the device out of Sleeper Mode is by toggling On/Off Switch. Effectively it is the
same as clicking on Top Button to wakeup, all bonding information is retained across power-ups.
Bonding information is stored when a new computing device is paired with the presenter, so they can
connect quickly the next time without repeating the pairing procedure. Wolfee Pr stores up to
8 bonding peers, which allows a user to easily switch among various computing devices. In case a
user need to wipe the connection history clean, putting the presenter into Sleeper Mode then waking
it up with Mouse Left Button should work.
To force the presenter into Sleeper Mode:
1. Use one hand to press and hold the mouse right button;
2. Then use the other hand to press and hold Top Button;
3. Wait for 2 seconds;
4. Release Top Button;
5. Release Mouse Right Button;
6. LED Indicator will flash several times and turn off.
LED Indicator
LED Indicator conveys two types of information: connection status, and battery level. When the
device is in Bluetooth Discovery Mode, LED Indicator blinks every 2 seconds. When a connection is
made, it turns into solid light.
In Presenter Mode, when the battery level is above 30% of full capacity, LED Indicator emits Blue
light in Discovery Mode or connected. When the battery level is below 30% but above 10%, LED light
turns Magenta. Less than 10%, Red.
