www.wolfeetechnologies.com
In Browser Mode, when the battery level is above 30% of full capacity, LED Indicator emits Green
light in Discovery Mode or connected. When the battery level is below 30% but above 10%, LED light
turns Yellow. Less than 10%, Red.
When LED Indicator is Red, the battery level is extremely low, user should stop using the device and
start charging immediately.
Control a PC/MacBook with Pr
With a traditional mouse, user uses his index finger to click on the left button, the middle finger for the
right button, the thumb & the ring finger to hold and move the mouse.
Wolfee Pr, on the other hand, is a handheld device. It does not need a flat surface to operate
on. A user can use the index finger to click on Mouse Left Button (Front of the device), the thumb for
Mouse Right Button (Small radio button in the middle), and the thumb on the touch surface for cursor
movement, and the other three fingers and the palm to hold the device.
Basic operations are described below:
For point-and-click action, slide thumb on touch surface to move cursor, then use index finger to click
Mouse Left Button.
For drag-and-drop action, press and hold Mouse Left Button with index finger, then slide thumb on
touch surface to move cursor. Once cursor is at the right location, retract index finger to release
Mouse Left Button.
Sequence for select-copy-and-paste:
1. Use thumb to move cursor to the right location;
2. Use index finger to click and hold Mouse Left Button, then move thumb to select;
3. Use thumb to click on Mouse Right Button to activate Context Menu, then move thumb in
the menu to choose Copy;
4. Move thumb once again to move cursor to the right location, click on Mouse Right Button
then select Paste.
Please visit wolfeetechnologies.com to find more Wolfee Pr video tutorials.
Control a Smartphone/Tablet with Pr
One key difference between mobile devices and traditional computers is in user interaction. Instead of
mouse and keyboard, mobile devices employ touch signals as the main input source. When use
Wolfee Pr to remotely control mobile devices, user needs to utilize buttons and touch surface
to emulate touch inputs.
