5.1.1
Adjusting the handle height
1. Lower the main lifting lever ( 1 ) to the front.
2. Slide the clamp sleeve ( 2 ) to the top and take apart the connecting rod ( 3 ).
3. Loosen the clamp bolt ( 4 ).
4. Pull the locking stud ( 5 ) and have it snapped in at the desired position.
5. Assemble the connecting rod ( 3 ) on this position.
5.2
Mounting the dust pipe
Insert the dust pipe ( 1 ) into the pipe connection ( 2 ) while gently rotating it.
It is sealed with 2 O-rings.
10
03/2009
3
4
5
2
1
2
1
