05/2012
CAYMAN-STRIPPER
#066666
u
10
1.0 Technical Data
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230 V
Power consumption . . . . . . . . . . . . . . . . . . . . . . .2.000 W, 11A
Power motor drive . . . . . . . . . . . . . . . . . . . . . . .1.300 W, 4,9 A
Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 to 20 m/min
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .70 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . . .83 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 m/s
2
Blade size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210/250 mm
Consumption rate . . . . . . . . . . . . . . . . . . . . . . . . . . . .8.500/min
Weight:
Basic device . . . . . . . . . . . . . . . . . . . . . . . . . .37 kg
Additional weight . . . . . . . . . . . . . . . . . . . . . . .17 kg
Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 kg
3.0 Safety instructions
Disconnect the power supply before any maintenance is carried
out.Use only recommended blades and ensure it is sharp before
starting.Maintenance should be undertaken only by qualified
personnel. Use only genuine Wolff spare parts.
Transport
To transport the machine, the handle and additional weights can
be dismantled easily. The weight without handle and additional
weights is 37 kg (see Chapter 5.0 + 5.5).
3.1 Introduction
This operating manual should be used to get the most benefit
from your CAYMAN-STRIPPER SILENT.
Following these instructions will both extend the life of your
machine and reduce repair costs. Please ensure any user of the
machine is fully familiar with the instructions for use before
allowing work to start.
3.2 Danger while working with the machine
The CAYMAN-STRIPPER is designed to the highest technical
standards. Incorrect use can be dangerous!
Disturbances that could impair safety, have to be eliminated at once.
Comes with
CAYMAN-STRIPPER
Additional weight
Hearing protectors
Safety gloves
Tool kit
Blade cover
Blade kit
Extension cable
Grease gun
Operation manual
2.0
Declaration of conformity
We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: EN 50144, according to the provisions of the
Directives 2006/42/EC.
Vaihingen/Enz, 01.03.2010
Dipl.-Ing. (FH) Dieter Hammel
Konstruktionsleitung
i.V.
WOLFF | Eine Marke der Uzin Utz Gruppe | D-71665 Vaihingen/Enz | Dieselstraße 19
Always remove the blade from the machine during
transport.
