4
Green Cut #063998 06/2011
1.0 Description of the device
1.1 Device description
The Green Cut was designed for the following tasks:
Trimming of factory edges on linoleum, vinyl and needle
fleece
Cutting strips
Seam cuts to size in adhesive bed
It is suitable for linoleum, vinyl and needle fleece flooring
1.2 Important parts
(1)
Green Cut
(2)
Blade holder
(3)
Spacer plate
(4)
Mounting bracket
(5)
Guide bracket 2 or 4 mm
(6)
Hooked blade
(7)
Trapezoidal blade
(8)
Clamping plate
(9)
Spacer (width: 5 mm, 10 mm, 15 mm)
2.0 Setting up the Green Cut
The Green Cut is delivered with blades installed and is
ready for immediate use.
The material is first scored with the trapezoidal blade
and then cut through with the hooked blade.
2.1 Inserting and replacing the blades
The Green Cut is suitable for left and right handed
operation. The blades can be inserted accordingly.
Unscrew screws (A)
Remove clamping plate (B)
Insert blades
Reassemble in reverse order.
Comes with.
Green Cut
10 Trapezoidal blades
10 Hooked blades
3 Filling strips
Operating manual
Operating manual
English
Green Cut
#63998
Read before use and keep safe
(2)
(1)
(3)
(6)
(5) (4)
(7)
(8)
(9)
Right-hander
Left-hander
B
A
