16
15
Storing Your Food Processor
The Wolfgang Puck Food Processor was designed so that all
attachments can be stored within the unit itself and inside the
Storage Drawer. See figure 17. For added convenience the unused cord
length can easily be pushed into the base of the processor for storage.
See figure 18.
figure 17
figure 18
Disassembly of Your
Food Processor
.
figure 14
Warning!
Always wait for the Chopping Blade
to stop moving completely before removing
the Cover.
1
Remove the Processing Bowl Cover by
turning counter-clockwise and lifting
straight up.
2
If using the Chopping Blade, remove the
Spindle with Chopping Blade attached.
Depress the two flexible tabs located just
above the Chopping Blade and press in
while pushing the Chopping Blade up.
See figure 15.
3
If using one of the Processing Discs, remove
first by grasping the center plastic section
of the Disc. See figure 16. Lift straight up to
remove, then remove center shaft.
4
To remove the Work Bowl, grasp the handle
and turn counter-clockwise to the 3 o’clock
position and lift straight up.
Only grasp under lip
figure 16
Only grasp by center
plastic section
figure 15
Depress flexible tabs
HSN_4CupFoodProcManual 8/3/07 4:04 PM Page 15