12
Care and Cleaning
•
Ensure that the unit is unplugged from the electrical outlet
before cleaning.
•
Wipe the motor housing with a damp cloth. Dry thoroughly. Do not
use any abrasive cleaners or scouring pads on the housing as this
will damage the finish.
•
Wash the bowls, cover and all attachments (except motor housing)
in warm water using a mild detergent (or see dishwasher instructions
below). IMPORTANT: Use caution when handling blades as they are
extremely sharp. Dry each part thoroughly before use.
Dishwasher Use
All plastic components deteriorate through the prolonged use of
a dishwasher for cleaning. However all parts of your processor are
tolerant to dishwasher use, (excluding the motor housing). If using
the dishwasher, place parts only on the top rack.
11
Operations
CHOPPING
1
Carefully remove the plastic cover from the blade.
IMPORTANT: Use caution when handling blades as they are
extremely sharp. Always hold blades by the plastic stem,
not the blade itself.
2
Place the blade in the center of the chopping bowl.
3
Add food to be processed.
4
Place the cover on the chopping bowl.
5
Insert the motor housing onto the cover.
6
Plug the power cord into a 120V AC power outlet.
7
Press down on and release the motor housing top for short bursts to
produce a pulsing action. Avoid over processing the ingredients.
8
Unplug after use and then remove the motor housing and cover.
9
Carefully remove the blade.
10
Remove the processed food from the chopping bowl.
EMULSIFYING
1
Place food to be whisked (such as egg white) into the chopping
bowl. See chart on p. 15 for maximum quantity.
2
Place the Emulsifying Disc onto the center pin of the chopping bowl
3
Place the cover on the chopping bowl.
4
Insert the motor housing onto the cover.
5
Plug the power cord into a 120V AC power outlet.
6
Press down on the motor housing top until desired results are
obtained.
HSN_MultiChopperManual2011:HSN_MultiChopperManual2011 1/13/11 3:37 PM Page 11
