If you want to work with more than one EYE-12 in the same room, the units should be set to different infrared
codes, in order to control them all individually.
To change the IR code, enter the
"Misc. Settings" and set the "IR Code" to A, B, C or
D (code A is default). To change the IR code on the remote control, simultaneously press
PRESET 1,
PRESET 2
and
ZOOM TELE
ress
PRESET 1, PRESET 2
and
ZOOM WIDE
LASER indication LED
(#30)
on-screen menu, go to
(#28)
(#20)
. Each time this key combination is used, the code switches from A
to B, C, D ... A ...in order given.
For resetting the remote control to code A, simultaneously p
.
The
shows the selected code (it flashes one time for code A, two times for
code B, three times for code C and four times for code D).
Please note that an infrared remote control can only be used up to a certain distance from the unit. Objects
situated between the EYE-12 and the infrared remote control, and weak batteries, interfere with reception.
14
MAINTENANCE
Infrared Remote Control
Different IR Codes
Cabinet
:
Clean the cabinet by gently wiping it with a soft, lint free cloth.
Lenses:
Clean the lenses by gently wiping with a soft, lint free cloth (do not use a paper tissue!). Clean by
breathing on the lens to create moisture then wipe with a lint free cloth (If need be, use a special
optical cleaner only!).
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and the anti-reflex coating!
Cleaning
front
back (open)
-
+
-
+
X
X
A
A
FOCUS
ALL
WIDE
TELE
1
2
3
MEMORY
1
2
3
4
5
6
7
8
9
POWER
LASER
PRESETS
IMAGE TURN
FREEZE
IRIS
AF
MENU
WHITE
HELP
The firmware (software) of your EYE-12 (including the o
) can easily be upgraded to the
latest version. The firmware update can be done via RS232, USB or Ethernet (LAN).
Firmware update files can be downloaded free of charge at
.
Updates via RS232, USB or Ethernet/LAN can be made with the Software vSolution Link by WolfVision.
Alternatively, the firmware update can be started in the on-screen menu (Advanced Settings / Device Info),
provided the Visualizer is connected to the Internet and a nameserver IP address is assigned (Advanced
Settings / Ethernet Settings). By selecting the line ”Check For FW Update”, the Visualizer checks the
WolfVision server for newer firmware files. Follow the on-screen instructions to start the update process.
For a RS232 connection, use a crossed serial RS232 cable (Null modem cable).
n-screen HELP
www.wolfvision.com
(support)
Firmware Upgrades
If the EYE-12 can only be controlled from a close distance, you
may need to change the batteries.
If the EYE-12 cannot be controlled at all with the infrared remote
control, you may need to check the code or to change the batteries.
Open the cover on the back of the remote control and replace both
1.5V AA (Code LR06) batteries with new ones of the same type.
Check the polarity of the batteries!
CAUTION
Risk of explosion if batteries are replaced by an incorrect type.
Dispose of used batteries according to the instructions. Recycle the batteries.
ATTENTION
Il y a danger d‘explosion s‘il y a remplacement incorrect de la batterie. Remplacer uniquement avec une
batterie du même type ou d‘un type équilanent recommandé par le constructeur.
Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Recycler les batteries.
