Shooting Area Outside of the Working Surface
Close-up adaptor lens
For shooting an object outside of the working surface, the close up lens
(#8)
has to be tipped up. It is impossible to remove the lens completely
from the unit and therefore it cannot get lost.
When using the Visualizer to record on the working surface again, put the
close up lens back to its original position.
The camera can be tilted by 290° (110° to the speaker and 180° to the
audience).
Turning the light / flexible viewing angle
In order to enable recordings with illumination outside of the working
surface, the light of the Visualizer
can be turned vertically.
To record at a lower viewing angle than the normal working position, just
fold the arm of the Visualizer as much as required, turn the camera head
and the light to pick up the desired object.
By default, the unit activates the stand by mode when the arm will be
folded. This behavior can be changed in the unit's on-screen menu (see
page 19).
Image Flip
By turning the camera head to record in front of the Visualizer, the image
will automatically be turned 180 degrees (”image flip”). This feature is
very useful for recording the face of the presenter or objects hanging on
the wall behind the unit.
12
∞
Slide
Place the slide onto the built-in light field, turn the camera head until
the slide is in the middle of the recorded image and switch on the back
light by touching the LIGHT key
(#16)
. The camera zooms in and
focuses on the the slide automatically.
Picking-up Slides
#9
PRESET
FREEZE
FOCUS-
FOCUS+
EXTERN
MENU
?
AF
