64
A
DDITIONAL PARTS REQUIRED
(
IN THE PLASTIC BAG
):
Left hinge cover
H
OW TO CHANGE THE HINGE POSITION
:
1.
Disconnect the appliance from the power supply (unplug).
2.
Open the fridge door (appliance in upright position) and remove the glass
shelves / door trays / etc. (s. fig. below / see also chapter 4.4.1 G
LASS SHELVES
and chapter 4.4.2 D
OOR TRAYS
).
3.
Close the door.
(Fig. similar; fig. serves as an example only)
4.
Remove the screw hole cover (A) on the left top of the appliance (s. fig. below)
carefully using a putty knife or a flat bladed screwdriver.
5.
Also remove the upper hinge cover (B) on the right top of the appliance (s. fig.
below) carefully using a putty knife or a flat bladed screwdriver.
