59
WARNING!
To reduce the risk of burns, electrocution, fire or injury to persons:
1. This appliance is equipped with the environmental-friendly
refrigerant R600a.
The refrigerant R600a is
inflammable
. The
components of the cooling circuit must neither be damaged during
transport nor use.
2. If any part of the cooling circuit is damaged,
the appliance must
not stand
near a fire, naked light or spark-generating devices.
Contact the shop you purchased the appliance at immediately .
3.
If gas is set free at the installation site:
a) Open all windows.
b)
Do not
unplug the appliance and
do not
use the control panel or
thermostat.
c)
Do not
touch the appliance until all the gas has gone.
d) Otherwise sparks can be generated which will ignite the gas.
4. Keep all components of the appliance away from fire and other
sources of ignition when you dispose of or decommission the
appliance.
5. Do not install the appliance near of volatile or combustible
materials(e.g. gas, fuel, alcohol, paints) and in rooms which may
have poor air circulation (e.g. garage).
6.
EXPLOSION HAZARD!
Do not store any explosive materials or
sprays, which contain flammable propellants, in your appliance.
Explosive mixtures can explode there.
7. While unpacking, the packaging materials (polythene bags,
polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
8. Always observe the required minimum distances for proper
ventilation.
9. Do not connect the appliance to the electric supply unless all
packaging and transit protectors have been removed.
10. Operate the appliance with 220~240V/50Hz/AC only. All
connections and energy-leading components must be replaced by
an authorized professional. Do not use a socket board or a multi
socket when connecting the appliance to the mains.
11. A dedicated and properly grounded socket meeting the data of the
plug is required to minimize any kind of hazard. The appliance must
be grounded properly.
