98
5.2 Replacing of the illuminant
WARNING!
The LED-illuminant must be replaced by a competent
person
only
. If the LED-illuminant is damaged, please contact a qualified
professional (
not covered by the guarantee
).
6. Trouble shooting
MALFUNCTION
POSSIBLE CAUSE
MEASURE
T
HE APPLIANCE DOES NOT WORK AT ALL
.
1.
The plug of the appliance is not
connected to the socket.
1.
Connect the appliance to the mains
properly.
2.
The plug has become loose.
2.
Check the plug.
3.
The socket is not supplied with
energy.
3.
Check the corresponding socket by
connecting it with another appliance.
4.
The fuse is switched off.
4.
Check the fuse box.
5.
The voltage is too low.
5.
Compare the data on the model
plate with the data of your energy
supplier.
T
HE COMPRESSOR DOES NOT WORK AT ALL
.
1.
Incorrect energy supply.
1.
Check the energy supply.
T
HE COMPRESSOR OPERATES FOR TOO LONG
.
1.
The appliance has been switched off
for a while.
1.
The appliance needs some time to
reach the preset temperature.
2.
Too much or too hot food in the
appliance.
2.
Remove any hot food.
3.
Doors opened too often or too long. 3.
Do not open the door too often/too
long.
F
ORMATION OF ENCRUSTED ICE
.
1.
The air outlets may be blocked by
food.
1.
Store the food in another place.
2.
The door is not properly closed.
2.
Close the door properly.
3.
The door seal is damaged or soiled.
3.
Clean and / or replace the door seal.
