~
63
~
2.
Touch the «
INCREASE
» -
SENSOR
repeatedly
to set the desired power level
of the extractor hood (power level 1 - 9).
3.
Touch and
hold
the «
TIMER
» -
SENSOR
for
3 seconds
to activate the setting of
the timer. The digital display
flashes
.
4.
Set the desired countdown time (1 minute to 9 minutes) using the
SENSORS
«
INCREASE
»
and / or
«
DECREASE
».
5.
When you have set the desired countdown time, touch the «
TIMER
» -
SENSOR
again (briefly) to confirm the setting.
If you do not confirm the setting within 10 seconds, the set countdown time is
saved
automatically
.
6.
The digital display indicates the countdown time.
7.
After the set countdown time has elapsed, the extractor hood switches off
automatically and returns to
STANDBY MODE
.
If the extractor hood is in
OPERATION MODE
, the countdown starts immediately
after you confirm the setting of the countdown time.
If the extractor hood is in
STANDBY MODE
, the countdown will not start until the
appliance (motor) is in operation.
While the countdown time elapses, the set power level can be changed
at any
time
using the
SENSORS
«
INCREASE
»
and / or
«
DECREASE
».
H
OW TO CHANGE THE SET COUNTDOWN TIME
❖
The set countdown time can be changed
at any time
. To do so, proceed as
described above under «
H
OW TO SET THE TIMER
,
STEP
3
-
5
».
«
DECREASE
» -
SENSOR
❖
You can use the «
DECREASE
» -
SENSOR
to decrease the power level (motor
speed) of the extractor hood (see also chapter 4.2.1 P
OWER LEVELS
).
❖
You can also use this sensor to decrease the countdown time of the timer.
«
INCREASE
» -
SENSOR
❖
You can use the «
INCREASE
» -
SENSOR
to increase the power level (motor speed)
of the extractor hood (see also chapter 4.2.1 P
OWER LEVELS
).
