~
69
~
3.
Then clean the grease filters with a soft brush. Be careful not to damage the grid
of the grease filters.
4.
After cleaning: rinse the grease filters thoroughly using hot water.
5.
Repeat this process in case of stubborn soilings or deposits.
6.
Dry the grease filters properly before you reinstall them.
C
LEANING OF THE ALUMINIUM GREASE FILTERS IN THE DISHWASHER
❖
The aluminium grease filters can also be cleaned in the dishwasher: Normal
programme (up to 65 °C)
Do not
put the grease filters in the dishwasher together with tableware. Dry the
grease filters properly before you reinstall them.
WARNING!
Operate the appliance
with inserted grease filters
only
.
Otherwise, recirculating-transported fat will deposit in the appliance and
the exhaust system. RISK OF FIRE!
NOTICE!
Grease filters which are blocked with food leftovers are not
covered by the guarantee.
6.2 Replacing of the carbon filter
WARNING!
Switch off the appliance and disconnect it from the mains
before you install any carbon filters (use the relevant fuse in the household
fuse box).
C
ARBON FILTERS
for your extractor hood are
optional
available.
❖
Conventional carbon filters
cannot
be cleaned.
❖
The capacity of these filters is limited. You can use such filters for about 3 - 6
months approx.
❖
Replace used filters immediately. Find further information on the filter packaging.
➢
If you want to replace the carbon filter, carefully pull it out of the gap between
the housing of the extractor hood and the motor housing and replace it by a new
one;
please always observe
the installation instructions for carbon filters in
chapter 3.1 C
ARBON FILTER
.
