~
70
~
R
EPLACEMENT INTERVAL FOR CARBON FILTERS
➢
At least every
3 - 6 months
according to the frequency of use of the extractor
hood.
You can order the
CARBON FILTERS
at
www.pkm-online.de
➢
Type name of the
CARBON FILTERS
: See chapter T
ECHNICAL DATA
6.3 Replacing of the illuminant
WARNING!
The LED - illuminant must be replaced by a competent
person
only
.
Do not carry out the replacement of the LED - illuminant
yourself
. If the LED - illuminant is damaged, please contact a
qualified
professional
(electrical engineer):
not covered by the guarantee
.
I
NSTRUCTIONS FOR THE QUALIFIED PROFESSIONAL
(
ELECTRICAL ENGINEER
)
WARNING!
Switch off the appliance and disconnect it from the mains
before you replace the LED - illuminant (use the relevant fuse in the
household fuse box).
NOTICE!
Do not touch the LED - illuminant with your hands. The sweat
on your fingers will reduce the operating time of your new LED - illuminant.
Use a thin cloth or a thin glove.
The power of each LED - illuminant
must not exceed 1.5 W.
1.
The LED - illuminant should have
cooled down
before you remove it.
2.
Remove the used LED - illuminant carefully using a flathead screwdriver
22
.
22
Depending on model.
