~
167
~
E
RROR
P
OSSIBLE CAUSE
(
S
)
M
EASURES
S
OME DETERGENT IS LEFT IN THE CONTAINER
.
1.
Dishes block the container of the
detergent
1.
Place the dishes properly.
S
TEAM
.
1.
Normal.
1.
There is some steam coming through
the vent near the door latch during
drying and water draining.
B
LACK OR GREY SPOTS OR RUST SPOTS ARE ON THE TABLEWARE
.
1.
Aluminium-made objects touched
the dishes.
1.
Clean the marks with a mild abrasive
cleaner
by hand.
2.
The items are not corrosion
resistant.
2.
Do not clean such items using the
appliance.
3.
The lid of the water softener
container is not close properly.
3.
Close the lid properly.
4.
You have not started a programme
after you added the water softener.
The remaining water softener is now
affecting the running programme.
4.
Always start the rapid programme
without adding any tableware when
you have added some water softener.
W
ATER REMAINS ON THE BOTTOM OF THE APPLIANCE
.
1.
Normal.
1.
A small amount of clean water
around the outlet keeps the water
seal functioning.
S
POTS AND FILM ON GLASSES AND CUTLERY
.
1.
Extremely hard water.
1.
Check the water hardness.
2.
Very low temperature of the water
supply.
2.
Check the temperature of the water
supply.
3.
The appliance is overfilled.
3.
Do not overfill the appliance.
4.
The dishes are placed improperly.
4.
Always place the dishes properly.
5.
Old or wet detergent.
5.
Always use proper detergent.
6.
The rinse aid container is empty.
6.
Refill the rinse aid container.
7.
Improper detergent dosage.
7.
Dose the detergent properly.
