~
99
~
3.
Install the appliance in a dry and well-ventilated place.
4.
Always install the appliance near of a water supply line, a water drain device and
a safety plug.
5.
Install the appliance on a level, dry and solid floor. Check the correct installation
with a spirit level.
6.
The back of the appliance must face the wall. The sides must be aligned to the
adjacent pieces of furniture and/or walls.
7.
Connect the appliance to the mains properly.
8.
The rating plate is inside the appliance or at the back.
2.2 Condensation strip
I
NSTALLATION OF THE CONDENSATION STRIP
(D
EPENDING ON MODEL
)
1.
Before installation
: you must install the condensation strip
28
on the bottom side
of the worktop to protect it from the water vapor released by the appliance. The
condensation strip deflects the water vapor from the worktop.
2.
You will find the condensation strip inside your appliance.
3.
Clean the bottom side of the worktop properly before you install the
condensation strip.
4.
Remove the protective foil from the adhesive surface of the condensation strip.
5.
Stick the condensation strip on the bottom side of the worktop.
C
ONDENSATION STRIP
NOTICE!
Improper installation of the condensation strip may cause
damage to the worktop.
28
Depending on model.
