background image

IMPORTANT WARNING:

Read all instructions before assembling

and using light

This light must only be used outdoors and basic safety precau-
tions must always be followed so to reduce the risk of personal
injury, electrical shock and fire.  Basic safety precautions include
the following:
1. When using an extension cord, use only three wire outdoor

extension cords that have a three prong plug.  Use only power
receptacles that accept the three prong plug.

2. Use light only with extension cords approved for outdoor use.

Proper extension cords will be marked with one of the follow-
ing type identification’s: SW, SW-A, SOW, SOW-A, STW,
STW-A, STOW, STOW-A, SJW, SJW-A, SJTW, SJTW-A,
SJTOW & SJTOW-A

3. When using the light in wet locations, ground fault circuit inter-

rupter (GFCI) protection should always be provided on the cir-
cuit(s) or outlet(s). 

Halogen Work light Safety Instructions

READ ALL INSTRUCTIONS – WARNING:

This light fixture must only be used outdoors and basic safety
precautions must always be followed to reduce the risk of fire,
electric shock, personal injury.  Basic safety precautions include
the following:

• This light fixture is not intended, designed or approved for use

in potentially dangerous locations such as explosive or flamma-
ble atmospheres.

• Never use light around flammable or volatile fluids such as

gasoline.

• Never use light inside dwelling.
• Keep light fixture away and out of reach of children, because

the light fixture gets hot.

1

Summary of Contents for ILLUME 1 5150









Reviews: