background image

LUMINOUS™ 570 SERIES LED LIGHT BAR - PAGE 8

WARRANTY

Wolo  Manufacturing  Corporation  (“Wolo”)  warranties  to  the  original  purchaser,  for  twelve  months  from  the  date  of 

purchase, that this product is free from defects in workmanship and materials. If there is such a proven defect, Wolo, 

at its option, will either repair or replace the item free of charge, if it is returned to Wolo within twelve months from the 

date of purchase together with proof of purchase as described below. Wolo reserves the right to inspect any defect prior 

to settling any warranty claim by repair or replacement. This warranty is limited as above provided and Wolo will not be 

responsible for fire or other casualty or accident, due to neglect, abuse, abnormal use, modifications, faulty installation 

of this product, or natural causes.

ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED 

TO A TERM OF TWELVE (12) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR 

ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH 

OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase. 

Provide with the return a brief description of the problem. Also, include with the return a check or money order in the 

amount of $25.00 to cover return shipping. 

Ship to: 

Wolo Manufacturing Corp. 

One Saxwood Street 

Deer Park, NY 11729 

Attn: Warranty Service 

       E-mail: tech@wolo-mfg.com

© 2020 Wolo Mfg. Corp.

All Rights Reserved

CLEANING

A scratched, dull or dirty lens can cause a reduction in brightness of the warning light. Never use a caustic or 

petroleum-based cleaner on any surface of the warning light. For best cleaning results, always use household 

glass cleaner or mild soap with a soft lint free rag. If the lens has scratches, or is dull, it is recommended those 

components be replaced to ensure maximum brightness of the warning light.

 

Summary of Contents for LUMINOUS 570 Series









Reviews: