background image

ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR 
PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF TWELVE (12) MONTHS. UNDER NO 
CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR 
ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF 
WARRANTY OR OTHERWISE.

To obtain warranty service, return the product prepaid, and include the original bill of sale showing the 
date of purchase. Provide with the return a brief description of the problem. Also, include with the return 
a check or money order in the amount of $10.00 to cover return shipping. Mail to:

Wolo Manufacturing Corp.

One Saxwood Street, Deer Park, NY 11729

Attn: Warranty Service

E-mail: tech@wolo-mfg.com

WARRANTY

Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for twelve months 
from the date of purchase, that this product is free from defects in workmanship and materials. 
If there is such a proven defect, Wolo, at its option, will either repair or replace the item free of 
charge, if it is returned to Wolo within twelve months from the date of purchase together with proof 
of purchase as described below. Wolo reserves the right to inspect any defect prior to settling any 
warranty claim by repair or replacement. This warranty is limited as above provided and Wolo will 
not be responsible for fire or other casualty or accident, due to neglect, abuse, abnormal use, 
modifications, faulty installation of this product, or natural causes.

© 2013 Wolo Mfg. Corp All Rights Reserved.

This horn meets the following standards:

Meets the U.S. 
Coast Guard’s 
C.O.L.R.E.G.S. and 
U.S. Inland Navigation 
Rules, Annex III 
Regulations for boats 
up to 20 meters / 65 ft.

This horn is National 
Marine Manufacturers 
Association (NMMA) 
“type accepted”

Meets the American Boat 
& Yacht Council (ABYC) 
A-23 standard for boats 
up to 20 meters / 65 ft.

Summary of Contents for OCEAN ALERT 160-24

Page 1: ...d mounting locations to ensure that there are no wires fuel line and or any other components that could be damaged by drilling WARNING If any wires are routed through drilled holes always de burr ensuring that there are no sharp edges Install a rubber grommet into all metal holes that wires are being routed through MOUNTING TRUMPET Fig 1 IMPORTANT The horn should be mounted facing forward whenever...

Page 2: ...d 9 Connect relay terminal 87 to the compressor s positive terminal Use 16 gauge wire or heavier 10 Connect relay terminal 85 to the horn button switch terminal Horn switch not provided 11 The horn switch s other terminal is connected to negative such as the battery post or any clean metal negative surface Use 18 gauge wire or heavier 12 Connect relay terminal 30 86 to positive 24 volts such as ba...

Page 3: ...ected directly to the power source 18 Connect relay terminal 87 to the compressor s positive terminal Use not less than 16 gauge wire 19 Connect the compressor s negative terminal to boat s negative battery post or any clean metal negative surface Use not less than 16 gauge wire RECAP OF RELAY TERMINAL CONNECTIONS Relay terminals 30 connected to 24 volts positive using the 15 amp inline fuse Relay...

Page 4: ... purchaser for twelve months from the date of purchase that this product is free from defects in workmanship and materials If there is such a proven defect Wolo at its option will either repair or replace the item free of charge if it is returned to Wolo within twelve months from the date of purchase together with proof of purchase as described below Wolo reserves the right to inspect any defect p...

Reviews: