6. The black wire is connected to ground; secure the black wire’s looped terminal to either the vehicle’s (-) battery
post or under any metal body bolt. Make sure that the ground connection is free of rust, paint and corrosion.
NOTE: The compressor is now ready to be used. Install the fuse back into the fuse holder and the compressor will
automatically turn on.
When the pressure drops below 80 PSI in the tank, the pressure switch will automatically turn on the compressor. When
the tank pressure is approximately 110 PSI the compressor will automatically turn off. If the compressor does not shut
off after 4 minutes of running time, check all air hose connections for leaks. Use soapy water or bubble solution on each
fitting, while the compressor is pumping. Use a thread sealant if leak persists after tightening.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED
TO A TERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR
ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH
OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase.
Provide with the return a brief description of the problem. Also, include with the return a check or money order in the amount
of $20.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp. One Saxwood Street, Deer Park, NY 11729
Attn: Warranty Service E-mail: tech@wolo-mfg.com
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the date of
purchase, that this product is free from defects in workmanship and materials. If there is such a proven defect, Wolo, at
its option, will either repair or replace the item free of charge, if it is returned to Wolo within three months from the date
of purchase together with proof of purchase as described below. Wolo reserves the right to inspect any defect prior to
settling any warranty claim by repair or replacement. This warranty is limited as above provided and Wolo will not be
responsible for fire or other casualty or accident, due to neglect, abuse, abnormal use, modifications, faulty installation
of this product, or natural causes.
© 2016 Wolo Mfg. Corp. All Rights Reserved.
COMPRESSOR SPECIFICATIONS
12-Volt heavy-duty compressor
Current: 10.5 amps at peak
CFM: 1.03
Duty cycle: 10% @100 psi
In-line fuse holder with 20-amp fuse provided
Permanent magnetic motor that is gearless
with thermo protection
Oil-less maintenance free design
High performance piston ring
Moisture & dust resistant
Painted aluminum alloy cylinder
Metal mesh air filter
TANK SPECIFICATIONS
1-Gallon
Welded steel mounting brackets
Pressure switch 80 psi. auto-on / 120 psi. auto-off
Pressure gauge
Fitting all brass
Size: L 14-1/4 in. x W 5-1/2 in. x H 8-1/4 in.
25 AMP
FUSE
Fig. 4
