Wolturnus Rex 350 User’s Manual 2019
Power Wheelchair
Cleaning and maintenance
In the event of faults or missing parts, contact the supplier or Wolturnus A/S. Contact information: see section
13.
Wolturnus A/S recommends that the wheelchair is serviced at least once a year by the supplier or Wolturnus
A/S.
8.2 Cleaning and disinfection
The wheelchair should be cleaned regularly according to how often it is used and how dirty it is.
Clean the frame, plastic parts and wheels with a mild cleaning agent. After cleaning, dry all parts with a dry cloth.
Clean cushions and upholstery with warm water and washing-up liquid. Remove stains with a sponge or soft
brush. Rinse afterwards with clean water and allow the parts to dry before mounting and using.
To disinfect, use water-based agents and follow the manufacturer’s instructions, yet keep away all water-based
agents from any and all electrical components.
Do not use corrosive cleaning agents, solvents or hard brushes.
NOTICE
Do not wet-wash. Do not use high-pressure equipment or a water jet. The wheelchair components must not
be put in a washing machine. Keep all types of liquids and fluids away from any electrical components.
NOTICE
Clean the seat and back upholstery, cushions, handles and armrest before disinfecting.
NOTICE
The wheelchair must not be used in salt water. Avoid getting salt, sand and other dirt that can cause damage
in the wheel bearings, castor mounting bracket or rear wheels. If this happens, the bearings should be repla-
ced.
NOTICE
The wheelchair control panel must be switched off and the brakes must be engaged before wheel or tire
change.
CAUTION!
24
Summary of Contents for Rex 350
Page 2: ...Wolturnus Rex 350 User s Manual 2019 Power Wheelchair Content 2...
Page 34: ......
Page 35: ......
