10
F2D Super Plus has 7 modes and are listed below. Press
Left
or
Right
keys to change the mode then press
OK/Enter
key to enter the
selection. You can always press
Mode
key to bring back the previous
menu or press
Mode
key twice to go back to
Home
menu.
5. Mode Selection
.
Film Type -
Selects type of film to convert, refer to
Film Type
Table
on page 13
.
Delete All -
Deletes all files in the internal memory or the inserted
SD/SDHC card
.
Convert -
Converts film to digital image. You can go to Covert
mode directly if all settings remained the same as last session
.
Playback -
Reviews all converted images that stored in memory
.
USB Upload -
uploads converted image files to PC or Mac
.
Language
- Sets menu in English or Japanese
11
6. Set Film Type
E
nsure the
Film Type
setting is correct, or you will see X-ray-like
image on the viewer. The film type setting will remain unchanged
even when F2D Super Plus is powered off.
1. At
Film Type
menu, press
OK/Enter
key.
2. Press
Left
or
Right
key to highlight
Color Negatives or Slides
Positive or
Black & White
then press
OK
key.
3.
Press
Left
or
Right
key to select
the type of film
then press
OK.
7.
Select Proper Adapter or/and Place Insert
Use proper
Adapter
or/and
Insert
to convert your film, refer to
Film
Type Table
on page 13.
Flip open the Adapter then place the insert into the middle of window
opening, align the 4 dimples underneath (see page 12). Snap close all
3 catches along the bottom edge tightly to avoid
jamming when
pushing adapter into the F2D Super Plus.
