25
selected as the master clock in the best master clock algorithm, 0 = highest priority,
255 = lowest priority.
Priority 2
Default: 128
Set the clock priority 2 (PTP version 2). The lower values take precedence to be
selected as the master clock in the best master clock algorithm (BMCA), 0 = highest
priority, 255 = lowest priority.
Delay Mechanism
Default: E2E
Configures the delay mechanism in boundary clock mode.
E2E
- The delay request or response mechanism used in the boundary clock mode.
P2P
- The peer-to-peer mechanism used in the boundary clock mode
3.1.5 DHCP SERVER
DHCP Server Setting
WoMaster’ switch has DHCP Server Function that will provide a new IP address to DHCP Client. After enable DHCP
Server function, set up the Network IP address for the DHCP server IP address, Subnet Mask, Default Gateway
address and Lease Time for client. Below is the DHCP Server Setting interface
