41
TERMS
DESCRIPTION
MD Level
Select the MD Level from 0~7
The eight levels range from 0 to 7. A hierarchical relationship exists between
domains based on levels. The larger the domain, the higher the level value.
Recommended values of levels are as follows:
Customer Domain: Largest (e.g., 7)
Provider Domain: In between (e.g., 3)
Operator Domain: Smallest (e.g., 1)
Domain Name
Enter a new Domain Name. Domain name, maximum of 43 characters
Add Association
Choose the Domain Name from the list that has been added up then add a new Association Name for the
Maintenance Association. After that choose the VLAN, Please create VLAN first, and each port set to be “tagged”
Add the Domain association name, end point type, port number and and the MEP ID then click
Add.
TERMS
DESCRIPTION
Domain Name
Choose the Domain Name that has been added
Association Name
Enter the Association Name. Association name, maximum of 45 characters
VLAN
Choose VLAN that has been assigned
Domain Name
Enter a new Domain Name. Domain name, maximum of 43 characters
Add Endpoint
Points at the edge of the domain, define the boundary for the domain. A MEP sends and receives CFM frames
through the relay function, drops all CFM frames of its level or lower that come from the wire side.
All of the configuration above will directly appear at the three table below, Domain Table, Association Table and the
Endpoint Table.
