17
After finish the configuration, click on
Submit
to apply User settings.
3.1.2 USER ACCOUNT
WoMaster’ switch supports the management accounts; with the Name default setting is
admin
and the authority
allow user to configure all of configuration parameters. Below is the
User Account
section that consists of two
interfaces, Local User and Radius Interface.
3.1.2.1 LOCAL USER
The Local User interface describes how to configure the system user name and password for the web management
login.
To change the Name and Password, user just needs to input a new Name and New Password then confirm the
new password in this Local User section. After finished, click
Submit
to apply the changes. Don’t forget to
Save
the
settings. Try to re-login with the new User Name and Password.
The description of the Local User interface is as below:
TERMS
DESCRIPTION
Name
Default: admin
Key in new user name here.
New Password
Default: admin
Key in new password here.
Confirm Password
Re-type the new password again to confirm it.
After finished setting up the User Name and Password, click on
Submit
to apply the configuration.
NOTE
:
For any kind of changes in configuration settings always remember to click on
Save
to save
the settings. Otherwise, all of settings User has made will be lost when the switch is powered off or
restarted.
NOTE
:
For security consideration, please change the password after first log in.
