6
1.
INTRODUCTION
1.1 OVERVIEW
DP612/DS612 is WoMaster 12G Layer 3 Managed Switch that provides 8-port Giga Ethernet, where DP612’s ports are
supported by IEEE 802.3af/at compliant for highly critical PoE applications so it can deliver up to 15.4W and 30W
power per port to enable the high-power requiring devices. LLDP power negotiation function and 2-Event
classification of IEEE 802.3at PoE plus support the PoE ports. The switch’s power budget is 240W per unit at 75°C for
the system and can deliver maximum 30W per port. For the best traffic control, the switch management side features
have been utilized: LACP, VLAN, QinQ, QoS, IGMP snooping,
and etc.
In order to uplink connection, the DP612/DS612 provides 4 SFP ports that can prioritize stream, such as video and
also optimize VoIP. 100/1000Mbps SFP type fiber transceiver and DDM (Digital Diagnostic Monitoring) type SFP
transceivers also equipped the switch for diagnosing transmission problem through maintenance and debugging of
the signal quality.
This device is also supported Dynamic Routing with Redundancy Protection
with
RIPv1&v2, OSPFv1&v2 for
intra-domain routing within an autonomous system
,
efficient unicast/multicast static routing and VRRP guarantees
sustainable routing in a single point of failure.
WoMaster managed switch is designed to provide faster, secure, and
more stable network. One advantage that makes it a powerful switch is that it supports network redundancy
protocols/technologies such as Rapid Spanning Tree Protocol (RSTP)/Multiple Spanning Tree Protocol (MSTP), ITU-T
G.8032 v1/v2 Ethernet Ring Protection Switching (ERPS)
.
IEC 61000-6-2 / 61000-6-4 Heavy Industrial EMC certified
design, rugged enclosure and -40~75°C wide operating temperature range, - all these features guarantee stable
performance of DP612/DS612 for surveillance data transmission under vibration and shock in rolling stocks, traffic
control systems and other harsh environments.
This switch also can be smartly configured by WoMaster advanced management utility, Web Browser, SNMP, Telnet
and RS-232 local console with its command like interface.
Advanced Cyber Security and redundancy features, guarantee the fastest network recovery, zero packet loss data
transmission, and high level of network protection against the hackers’ attacks. Excellent security features also
provided, such as DHCP client, DHCP server with IP and MAC binding, 802.1X Port Based Network Access Control, SSH
for Telnet security, IP Access table, port security and many other security features. All of these features in order to
ensure the secure data communication.
