20
Subnet Mask
Display the subnet mask of the device
Gateway IP Address
Display the gateway IP Address of the device
USB Status
Display the USB port status when the USB is plugged or unplugged.
SD Card Status
Display the SD Card port status when the SD Card is inserted or not inserted.
3.1.2 LOGIN SETTING
WoMaster’ router supports Login Setting that has several authentication methods. It is supported with ,
Radius, and Multi-User Authentication. This Login Setting consists of two level, admin and guest. Where the admin
level, it has the privilege to read and write and for the guest level the privilege is read only. Below is the
Login
Setting
section for
admin level
.
With the Name default setting is
admin
and the authority allow user to configure all of configuration parameters.
The Login Setting interface describes how to configure the system username and password for the web management
login.
To change the Name and Password, user just needs to input a new Name and New Password then confirm the
new password in this section. Try to re-login with the new User Name and Password.
Below is the interface for
guest level
.
With the Name default setting is
guest
and the authority allow user to read only all of configuration parameters.
When user try to change the configuration, message will appear if user is not permitted to configure the
configuration. Below is the interface.
NOTE
:
For security consideration, please change the password after first log in.
