60
WDS-Client
In WDS-Client mode, user must specify the specific WDS-AP’s SSID and MAC address. So WDS-Client just do the
transmission to the WDS-AP only. In this mode, please make sure that the configuration should be the same as the
WDS-AP as well.
The description of the columns is as below:
TERMS
DESCRIPTION
WLAN Interface
Check the box to disable the WLAN interface and stop all of the wireless
functions.
Operation Mode
Select the Operation Mode for the router. (AP, Wireless Client, WDS-AP and
WDS-Client)
SSID
Default: WR322_1
Input the primary name of the access point.
AP MAC Address
Default: 00:00:00:00:00:00
Set the specific AP MAC Address of the WDS-AP.
Wireless Mode
Default: 802.11G/N
Select the specific wireless mode, different wireless mode has a different
configuration. For each wireless mode, it has a specific frequency and it has
different basic setting.
