Wonder W3D1/24 Operation Manual Download | Manualshive

Page: 5 / 12

background image

Be certain to read all labels when you are spraying paints or toxic materials and follow
the safety instructions. Use a respirator mask if there is a chance of inhaling anything
you are spraying. Read all instructions and be sure that your respirator mask will
protect you.

Always wear safety goggles or glasses when using an air compressor. Never point any
nozzle or sprayer towards a person or any part of the body.

Do not adjust the pressure switch or relief valve for any reason. Doing so will void all
warranty. They have been pre-set at the factory for the maximum pressure of this unit.

A POTENTIAL HAZARD THAT MAY CAUSE

MODERATE INJURY OR DAMAGE TO EQUIPMENT.

Drain the moisture from the tank daily. A clean/dry tank will help prevent corrosion.

Pull the pressure relief valve ring daily to ensure that the valve is functioning properly
and to clear the valve of any possible obstructions.

To provide proper ventilation for cooling, the compressor must be kept a minimum of
31cm (12 inches) from the nearest wall, in a well-ventilated area.

Fasten the compressor down securely if transporting is necessary. Pressure must be
released from the tank before transporting.

Protect the air hose and electric cord from damage and puncture. Inspect them weekly
for weak or worm spots and replace if necessary.

DISCONNECT  POWER  AND  RELEASE  ALL
PRESSURE  FROM  THE  SYSTEM  BEFORE
ATTEMPTING  TO  INSTALL,  SERVICE,
RELOCATE

Never  use  an  extension  cord  with  this
product. Use additional air hose instead of an
extension  cord  to  avoid  power  loss  and
permanent  motor  damage.  Use  of  an
extension cord voids the warranty.

Follow  all  local  electrical  and  safety
codes  as  well  as  National  Electrical
Codes  (NEC)  and  Occupational  Safety
and Health Act (OSHA).

Electric motors and starters must be
securely and adequately grounded
using a three-pronged Outlet.

«
...
3
4
5
6
7
...
»

Summary of Contents for W3D1/24













Reviews:

No comments

Related manuals for W3D1/24

Brand: Gardner Denver Pages: 60

Brand: Prebena Pages: 44

Brand: Reliable Pages: 12

Brand: Tamiya Pages: 8

Brand: Huvema Pages: 14

Brand: Quincy Compressor Pages: 114

GASOLINE AIR COMPRESSOR

Brand: Mi-T-M Pages: 36

Brand: Invacare Pages: 180

Brand: J.E. Adams Pages: 16

Brand: Carrier Pages: 20

Brand: Westinghouse Pages: 40

Brand: Atlas Copco Pages: 103

PTS 1600 Cud S3A/T3 APP

Brand: Atlas Copco Pages: 128

Brand: Atlas Copco Pages: 128

Brand: Atlas Copco Pages: 150

Brand: Atlas Copco Pages: 152

Brand: Atlas Copco Pages: 72

Brand: WilTec Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands