Wonder W3D1/24 Operation Manual Download | Manualshive

Page: 4 / 12

background image

Read this manual carefully before operating or servicing this air compressor to familiarise
yourself with proper safety operation and maintenance procedures.

FAILURE TO COMPLY

WITH INSTRUCTIONS IN THIS MANUAL COULD RESULT IN PERSONAL INJURY, PROPERTY
DAMAGE AND/OR VOIDING OF YOUR WARRANTY

. Following the instructions in this manual

will provide a longer and safer service life for your air compressor.

AN IMMEDIATE HAZARD THAT WILL

CAUSE SERIOUS INJURY OR LOSS OF LIFE.

TO REDUCE THE RISK OF FIRE OR EXPLOSION. NEVER SPRAY FLAMMABLE LIQUIDS IN
A CONFINED AREA

It is normal for the motor and pressure switch to produce sparks

while operating. If sparks come into contact with vapours from gasoline or other
solvents, they may ignite causing fire or explosion. Always operate the compressor in
a well-ventilated area. Do not smoke while spraying. Do not spray where sparks or
flames are present. Keep the compressor as far away from the spray area as possible.

The solvents Trichloroethane and Methylene Chloride can chemically react with
Aluminium used in paint spray guns, paint pumps etc, and cause an explosion. If you
are using these solvents, use only stainless-steel spray equipment. This does not affect
your air compressor, but many affect the equipment being used.

Never directly inhale the compressed air produced by the air compressor. It is not
suitable for breathing purposes.

A POTENTIAL HAZARD THAT COULD

CAUSE SERIOUS INJURY OR LOSS OF LIFE.

Do not weld on the air tank of this compressor. Welding on the air compressor tank
will affect the strength and cause an extremely hazardous condition. Welding on the
tank in any manner will void the warranty.

Never use an electric air compressor outdoors when it is raining or on a wet surface,
as it may cause an electric shock.

ALWAYS shut off the compressor, remove the plug from the outlet, and bleed all
pressure from the system when the compressor is not in use or before servicing.

Check the manufacture

r’s maximum pressure rating for air tools and accessories.

Compressor outlet pressure must be regulated so as to never exceed the maximum
pressure rating of the tool.

High temperatures and moving parts are present under the shroud. To prevent burns
or other injuries, DO NOT operate with the shroud removed. Allow the compressors
parts to cool before handling or servicing,

«
...
2
3
4
5
6
...
»

Summary of Contents for W3D1/24













Reviews:

No comments

Related manuals for W3D1/24

Brand: Rac Pages: 4

Brand: DeVilbiss Pages: 14

Brand: dbx Pages: 41

Brand: Atlas Copco Pages: 50

Brand: Bacharach Pages: 26

Brand: SM ProAudio Pages: 12

Platinum Series

Brand: Toolex Pages: 7

Brand: WERTHER INTERNATIONAL Pages: 21

airmaster TIGER 9/24

Brand: Machine Mart Pages: 24

Brand: dbx Pages: 44

Turbocor Twin-Turbine TTS Series

Brand: Danfoss Pages: 114

Brand: HART Pages: 36

Brand: Danfoss Pages: 74

Brand: Vmac Pages: 36

RAPTAIR-MF D600007

Brand: Vmac Pages: 68

Brand: RIX Industries Pages: 59

RIX 2V3B-4.1V Series

Brand: RIX Industries Pages: 79

Brand: Northern Industrial Tools Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands