15
14
A
B
N
L
When you install the light
switch, you will be dealing
with mains voltages (230
Vac).
If you are unsure about
how to do this, use
a
NICEIC
approved electrician.
!
Inputs
Ou
tpu
ts
L1
N1
L2
N2
L3
N3
Light Switch
The light switch replaces
a
standard light switch. For the primary
light switch, choose one that is close to your wireless internet
router or near the middle of your home.
1. Switch o
ff
the mains power supply that supplies the light switch.
Remove the old light switch.
2. Pull the side of the Wondrwall light switch cover towards you to
unclip it from the base (A).
3. Connect the Live and Neutral input cables to the L and N
connectors on the back of the light switch base (B). The
connection screws are above the cable entry points.
4. Connect the Live and Neutral output cables to the lights:
y
If you only use 1 lighting circuit, use connections L1/N1. The
middle LED will light.
y
For 2 circuits, use L2/N2 and L3/N3. The outer LEDs will light.
y
For 3 circuits use all output connections. All LEDs will light.
