©2014
WOO
AUDIO
tm
Inc.
All
rights
reserved.
www.wooaudio.com
Rev
1.0.
May,
2014
9
Quick Installation
Installing tubes
Umbilical Power Cord Installation
20
Align the tube in
the tube socket
according to the
RED arrows
Hold the tube
firmly, slowly
inserting it down
into the socket.
Care must be
taken to only
apply force
perpendicular to
the tube socket;
never insert it at
an angle. Apply a
slight rocking
motion for harder
to insert tubes,
never apply
circular motion.
Connecting the Amplifier unit
Align the female plug to the DC input
connector. The “arrow” marking on the plug
should face up when it is properly oriented.
Insert the plug into the socket and turn the
locking ring on the plug until fully tightened.
Connecting the Power Supply unit
Align the male plug to the DC input
connector. The arrow marking on the plug
should face up when it is properly oriented.
Insert the plug into the socket and turn the
locking ring on the plug until fully tightened.
