18
Mini Boiler Owners Manual
2015
Installation
6. Raise the leg supports to a point just below the
intake auger tube. Tighten the “u” bolts on the leg sup
-
ports to secure the legs to the leg supports. Fill the side
hopper with wood pellets and prime the auger follow
-
ing the directions on page 20.
Metal Pellet Hopper Assembly
The optional pellet hopper holds approximately 280
pounds of pellets. Northwest Manufacturing, Inc.
recommends using our pellet hopper to ensure proper
fuel flow. Each part is numbered on the chart on the
next page for reference.
7
6
14
2
10
12
11
2
7
Install the adjustable feet into each of the
four legs of the hopper.
Join the assembled side walls to the legs using the
supplied screws. The legs will be on the inside of the
hopper, with the skins screwed to the outside.
Assemble the four side walls out of side skins 12 and
10. Use the hopper side seam 11 to join the skins to
-
gether using the provided screws.
