SAFETY
Moulder Operation
Safety
EGdoc030112
2-5
2
the planing head manually.
WARNING!
Be sure that the cutting knives are firmly mounted before
starting the motor.
IMPORTANT!
When starting the machine for the first time, make sure
that the cutter rotation direction is as indicated by the arrow located on
the side cover. If the rotation direction is incorrect, invert the phases in
the phase inverter located in the power socket (UL Version, 3-phase).
Setting the phases in the phase inverter correctly will ensure the
correct cutter rotation direction.
DANGER!
To check the cutter rotation direction, look at the motor fan
when the motor is starting or stopping through the inspection window
shown below. Do not for any reason check the rotation direction by
touching the cutter using any tool or a piece of wood. Doing so may
result in serious injury or death.
FIG. 2-1
WMM072B
Feed Crank
Safety Handle
!
