SAFETY
Use Proper Maintenance Procedures
Safety
EGdoc030112
2-7
2
Use Proper Maintenance Procedures
DANGER!
Make sure all electrical installation, service and/or
maintenance work is performed by a qualified electrician and is in
accordance with applicable electrical codes.
DANGER!
Hazardous voltage inside the electric boxes and at the
motor can cause shock, burns, or death. Disconnect and lock out
power supply before servicing! Keep all electrical component covers
closed and securely fastened during machine operation.
WARNING!
Consider all electrical circuits energized and dangerous.
WARNING!
Never assume or take the word of another person that the
power is off; check it out and lock it out.
WARNING!
Do not wear rings, watches, or other jewelry while working
around an open electrical circuit.
IMPORTANT!
The moulder is equipped with an emergency stop
button. This button is used to immediately stop the motor in hazardous
situations. The emergency stop button should always be in proper
condition.
IMPORTANT!
The machine must not be modified by the owner. Use
only original spare parts.
Keep Safety Labels In Good Condition
IMPORTANT!
Always be sure that all safety decals are clean and
readable. Replace all damaged safety decals to prevent personal
injury or damage to the equipment. Contact your local distributor, or
call your Customer Service Representative to order more decals.
IMPORTANT!
If replacing a component which has a safety decal
affixed to it, make sure the new component also has the safety decal
affixed.
Fire-Fighting
!
!
