SETUP & OPERATION
Mounting the Moulding Knives
4
4-9
EGdoc030112
Operation
4.3
Mounting the Moulding Knives
WARNING!
Always shut off the motor and allow all moving parts to
come to a complete stop before mounting/dismounting the knives.
WARNING!
Always wear gloves and eye protection when
mounting/dismounting the knives. The knives are very sharp. You can
hurt yourself even when you touch any knife lightly.
WARNING!
Before mounting the knives, make sure the knives, the
mounting wedges and the cutter sockets are immaculately clean. Any
sawdust or resin inside the cutter may cause the knife to break.
Damaged knives or clamping wedges should be replaced immediately.
IMPORTANT!
The knives should be mounted symmetrically. They
should be mounted in the same position on the cutter.
1.
Remove the cutter cover.
FIG. 4-3
!
