SETWORKS OPERATION
Memory Buttons (A, B, C, D, E)
5
5-6
EGdoc030112
SETWORKS OPERATION
See Pic. 5-4.
To use any stored value, press the corresponding memory button and confirm by pressing
. The cutter will move by the selected value.
NOTE:
If the “Check real size” light starts blinking during normal
operation of the Setworks, press and hold the
button. Measure
and enter the distance between the bottom knife and the moulder bed
exact to 0.1 mm. For example: if you want to enter 250mm - press
2-5-0-0
without a pause and confirm by pressing
.
PIC. 5-4
ENTER
SET
REAL SIZE
SAVE
