INTRODUCTION
Machine Description
INTRODUCTION
15doc030112
1-1
1
SECTION 1 INTRODUCTION
Thank you for choosing Wood-Mizer wood processing equipment!
Wood-Mizer is committed to providing you with the latest technology, best quality
and strongest customer service available on the market today. We continually evaluate our
customers’ needs to ensure we’re meeting current wood-processing demands.
Your comments and suggestions are welcome.
The present documentation contains information that should be used when preparing the
machine for operation, working with it and when servicing or repairing it, as well.
1.1
Machine Description
The Wood-Mizer moulder is designed for planing, thicknessing and moulding lumber.
The machine must not be used for other purposes.
The moulder is equipped with one horizontal cutter adapted for mounting planing knives
as well as moulding knives.
Using the machine correctly, you will obtain a perfectly smooth surface and a high degree
of accuracy.
The moulder should be operated only by an adult who has read and understood the entire
operator’s manual.
The machine is built to be durable and easy to operate and maintain.
In case of moulders equipped with manual feed system, the moulding head should be
moved by using the crank handle only to ensure operator safety and best accuracy. The
operator must not try to push the moulding head by hand.
