Maintenance
2
2-2
TRdoc053121
Maintenance
DISMANTLING
1.
Slacken off and remove screw (1).
2.
Remove bellows (8) from the ball coupling (9).
3.
Slacken off and remove screws (3).
4.
Remove the defective shock absorber from the rear.
MOUNTING
1.
Push the new shock absorber into the draw tube from the rear. Damper lug must be
parallel to drawbarholes in drawshaft.
2.
Push screw (3) through the damper lug and lock check operating of coupling.
3.
Push damper (6) in from rear and secure using screw and plate.
4.
Locate bellows (8) on the screw(3). Torque: 86 Nm
