Maintenance and Alignment
Safety Devices Inspection (Only CE Version)
4
4-21
EGdoc031120
Maintenance and Alignment
See Figure 4-17.
With the anti-kickback finger raised and locking both levers (A) in the notches located in the
sheet (B), the reverse gear engages and the material can be removed.
5. Safety switch circuit - blade shaft cover
See Figure 4-18.
Start the main motor/engine
Unbolt the fasteners (C) to remove emergency stop (B) safety switch (A).
The motor/engine should stop. It should not be possible to restart the motor/engine
Tighten the fasteners (C) to reinstall emergency stop (B) safety switch (A) - It should not be
FIG. 4-18
A
B