Operation
Tensioning the Blade
Operation
MHdoc012819
2-18
2
2.5
Tensioning the Blade
See Figure 2-11.
Place the provided handle (”D”) in the blade tensioner socket
and secure it with the bolt.
The decal ”E” in the figure below shows how the saw head valves should be set to
tension either blade.
1.
To tension the blade on the
first saw head
of the module:
Open the main valve (”C”) by moving its lever all the way to the left;
Open the valve of the first saw head (”A”) by turning its lever all the way to the right;
Turn the lever of the second head valve (”B”) all the way to the left to close this
valve;
Move the lever ”D” up and down to tension the blade (
).
2.
To tension the blade on the
second saw head
of the module:
Open the main valve (”C”) by moving its lever all the way to the left;
Close the valve of the first saw head (”A”) by turning its lever all the way to the left;
Turn the lever of the second head valve (”B”) all the way to the right to open this
valve;
Move the lever ”D” up and down to tension the blade.
3.
To tension the blades on
both saw heads
of the module:
Open the main valve (”C”) by moving its lever all the way to the left;
Move the lever of the first head valve (”A”) all the way to the right to open this valve;
Open the valve of the second saw head (”B”) by turning its lever all the way to the
right;
