MULTISETWORKS OPERATION (OPTIONAL EQUIPMENT)
Diagnostic
MULTISETWORKS OPERATION (OPTIONAL EQUIPMENT)Multisetworkdoc012819
3-15
3
See Figure 3-17.
Drives values may vary.
Point Bit0-Bit7 – drive register status
Drive velocity – Input – Entered speed (Hz).
Drive velocity – Output – Motor speed (Hz).
Motor current – nominal value for 400/460V should be ~ 1,5A.
Up and down limit switches – conditions of up and down limit switches.
Green – limit switch is released, Red – limit switch is active.
Use arrows to move the saw head up and down with minimal speed.
FIG. 3-17