Remote Operation
Preparing for Remote Operation
1
1-5
ROdoc070822
Remote Operation
1.3
Preparing for Remote Operation
Set up the sawmill as instructed in your sawmill operator’s manual.
CAUTION!
Moving the saw carriage before removing the
cable chain support may cause damage to the chain. Also,
moving the saw carriage when the chain is frozen can
damage the chain.
for recommended chain
deicing procedure.
See Figure 1-4.
Before moving the saw carriage, remove the cable chain support
bracket.
1.
Disengage the rubber strap holding the cable chain to the support bracket.
2.
Loosen the handles and remove the support bracket from the sawmill track rail.
3.
Place the support bracket on the storage bracket located on the sawmill frame between
the first and second bed rails. Tighten the handles to secure the support bracket to the
storage bracket and secure the rubber strap in the bracket hole.
FIG. 1-4
Store chain support on
bracket between first
and second bed rails
3H0479
Remove strap
from cable chain
Loosen handles
and remove
chain support
Remove strap
from cable chain
Loosen handles
and remove
chain support
Store chain support on
bracket between first
and second bed rails
