Cascade Gas-Fired Rotisserie & Charbroiler
Installation and Operation Manual
17
An ongoing program of product improvement may require us to change
specifications without notice.
WS-GFR-MB, Revised November 2014.
Doc no: M0050.01
info@woodstone-corp.com
or visit
woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
DAILY OPERATION
ADJUSTING THE FLAME HEIGHT
To increase the height of the radiant flame, turn the gas throttle knob (below and to the right of the front controller) counter
clockwise (to the left)� To reduce the height of the radiant flame, turn the gas throttle knob clockwise (to the right)�
ADJUSTING DRUM ROTATION SPEED
Turning the
BLACK
drum speed control knob counterclockwise slows rotation of the drum; turning it to the right will increase the
speed� For most cooking situations, setting the knob at the midpoint (with the white indicator line straight up) is a good place to start�
STOPPING THE DRUM ROTATION AND BURNERS
There are three ways to stop the drum rotation and burners�
1� Push the
RED
button on the front controller
2� Push the
RED
button on the rear controller
3.
Open the rear door
TO RESTART THE ROTISSERIE & BURNERS
Close the doors and first push the
GREEN
start rotation button and then the
YELLOW
start flame button� The speed of the rotisserie
can be adjusted using the
BLACK
drum speed control knob located on the controller�
Always wait 5 minutes before attempting
to relight the burners.
TROUBLESHOOTING
If drum fails to start after depressing
GREEN
start rotation button:
1.
Check the circuit that oven is connected to at the outlet and/or circuit breaker
2.
Press the Push Button Circuit Breaker, located in center of controller
SPIT DIMENSIONS
GFR-6
GFR-10
Using 5 spits
Using
10 spits
