Cascade Gas-Fired Rotisserie & Charbroiler
Installation and Operation Manual
9
An ongoing program of product improvement may require us to change
specifications without notice.
WS-GFR-MB, Revised November 2014.
Doc no: M0050.01
info@woodstone-corp.com
or visit
woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
ASSEMBLY
STEP 3: CONNECT CHARBROILER TABLE TO ROTISSERIE CABINET
Using the two Connector Plates and the bolts provided, connect the two bottom rails of the charbroiler table to the corresponding
bottom rails of the rotisserie cabinet� See the illustration below for the correct installed location of the Connector Plate (Part A)�
STEP 4: CONNECT FLEXIBLE ELECTRICAL HARNESS
a.
Remove the Service Panels on the Controller side of the rotisserie cabinet and locate the yellow flexible electrical cable�
b.
Remove the Controller Plate from the front of the charbroiler table and carefully set it aside�
c.
From the inside of the rotisserie cabinet, feed the yellow electrical cable through the controller cutout in the front of the
charbroiler table�
d.
Secure the electrical harness to the back of the Controller faceplate and reinstall the controller�