R
GE
R
WOODBRIDGE W
R
GE
R
WOODBRIDGE W
GE
WOODBRIDGE W
www.woodbridgebath.com
11
38
˙
C
25
˙
C
45
38
˙
C
25
˙
C
45
(4) Func on Se ng
The unit is ON, press FUNCTION key to enter FUNCTION se ng interface. LCD screen
will display as below:
4.1 – FUNCTION INDICATOR
FUNCTION ON/OFF
(“
√
”means func on ON, Blank means func on OFF)
Keep pressing FUNCTION key ll the func on you are looking for, then press POWER/Func on
bu on to ac vate or deac vate the func on.
4.2 Under Func on Select will have all or part of the following func on to choose from.
Current temperature
Water Pump
Timer for water pump
Defaulted temperature
Air Blower
Constant heated
5. OPERATINGCYCLE
When one or more func on was selected but a not on func on mode, following func on cycle
sequence indictor will be blinking.
Current
temperature
Water Pump
Timer for
water pump
Defaulted
temperature
Air Blower
Constant heated
LED lightson bo om
Note:
1. Default opera ng me for water pump is 45 minutes, press Power/Func on ON OFF bu on to add
more minutes. Press 1 me for 1 extra minutes and the maximum running me is 60 minutes.
2. Constant heat will only operate when water pump is running, once constant hea ng been selected,
the water pump will operate at the same me.
3. Default Constant heat temperature is 25C, and maximum heat temperature is 45C. When the water
temperature is <25C, press Power bu on to increase the temperature.
4. When pump or constant heat status indicator is not blinking, means default me has reached and both
pump and heat func on have stopped.
5. When pump or constant heat status indicator is blinking, means func on has been select but not
operate due to no water or not enough water.
LED lightson
ba om
